If you’re a fan of Jojo Siwa, then you know that one of her trademark accessories is her big, colorful hair bows. If you’re looking to get in on the trend, but don’t know how to make a Jojo Siwa hair bow, don’t worry – we’re here to help!
To make a Jojo Siwa hair bow, you’ll need:
-A piece of fabric that’s at least 14″x6″
-A hot glue gun
-Scissors
-Ruler
1. Start by folding the fabric in half so that it’s 7″x6″.
2. Cut a small notch in the fabric at the folded edge.
3. unfolded the fabric and make a loop with the long edge.
4. Glue the ends of the loop together to form a bow.
5. Glue a hair clip to the back of the bow.
There you have it – your very own Jojo Siwa hair bow!
Table of Contents
How do you make JoJo hair bows?
Making JoJo bows is a fun, easy way to add a pop of color to your hair. In this article, we will show you how to make your own JoJo bows using a few simple steps.
What you’ll need:
-Ribbon
-Scissors
-Hot glue gun
Step 1: Cut a piece of ribbon that is about 18 inches long.
Step 2: Fold the ribbon in half, and then tie a knot in the middle.
Step 3: Cut the ends of the ribbon at an angle.
Step 4: Glue the ends of the ribbon together to form a loop.
Step 5: Glue the loop to the back of the bow.
Step 6: Glue a hair clip to the back of the bow.
Your bow is now complete!
How do you make a JoJo Siwa bow maker?
Making a JoJo Siwa bow maker is a fun and easy project that can be completed in a few simple steps. Supplies you will need include a piece of cardboard, a ruler, a pencil, scissors, a hot glue gun, and a variety of craft supplies such as feathers, sequins, and ribbon.
To make the bow maker, start by cutting a piece of cardboard into a 14-inch by 6-inch rectangle. Next, use a ruler and pencil to draw a line down the center of the cardboard, and then make two more lines that are 1.5 inches apart from the center line. Cut along these lines to create three panels that are each 7-inch by 6-inch.
Next, use a hot glue gun to attach the two shorter panels to the long panel, making sure that the glued edges are even. Then, use more hot glue to attach the bow maker to the center of a 14-inch piece of ribbon. Finally, use craft supplies to decorate the bow maker. Add feathers, sequins, or other embellishments to the center of the bow, and then tie the ribbon into a bow.
Your JoJo Siwa bow maker is now ready to use! Simply wrap the ribbon around your head to create a bow, and then use the attached clasp to secure it in place.
How do you make a Jojo bow out of paper?
A Jojo bow is a type of hair bow that is made out of paper. It is named after the character Jojo Siwa, who is known for wearing them in her hair. Jojo bows can be made in a variety of different colors and styles, and they are a popular accessory for girls of all ages.
To make a Jojo bow out of paper, you will need a piece of paper that is at least 12 inches wide and 18 inches long. You will also need some scissors, a ruler, and a pen or pencil.
Start by folding the paper in half width-wise, so that it is 6 inches wide. then, fold the paper in half again, so that it is 3 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 3 inches wide.
Next, unfold the paper and fold it in half length-wise, so that it is 9 inches long. Cut along the folded edge, so that you have two strips of paper that are each 9 inches long.
Now, unfold the paper and fold it in half again, so that it is 4.5 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 4.5 inches wide.
Next, take one of the strips of paper and fold it in half length-wise, so that it is 2.25 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 2.25 inches wide.
Take the second strip of paper and fold it in half width-wise, so that it is 1.125 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 1.125 inches wide.
Now, take one of the strips of paper that are 1.125 inches wide and roll it into a coil. Make sure that the coil is tight, and that there are no loose ends. Secure the coil with a piece of tape, and repeat with the other strip of paper.
Next, take one of the coils and fold it in half width-wise, so that it is 0.5625 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 0.5625 inches wide.
Take the other coil and fold it in half length-wise, so that it is 0.28125 inches wide. Cut along the folded edge, so that you have two strips of paper that are each 0.28125 inches wide.
Now, take one of the strips of paper that are 0.28125 inches wide and roll it into a coil. Make sure that the coil is tight, and that there are no loose ends. Secure the coil with a piece of tape, and repeat with the other strip of paper.
Finally, attach the two coils to each other using a piece of tape, and trim the excess paper. Your Jojo bow is now complete!
How do you make a 3 ribbon hair bow?
Making a three-ribbon hair bow is a simple process that can be completed in a few minutes. All you need is a hair clip, three ribbons, and a few basic supplies.
To make a three-ribbon hair bow, you’ll need:
-A hair clip
-Three ribbons, at least 18 inches long
-Scissors
-Hot glue gun
1. Cut the ribbons to the desired length. For a three-ribbon hair bow, the ribbons should each be 18 inches long.
2. Fold each ribbon in half and tie a knot in the middle.
3. Glue the ends of two of the ribbons to the hair clip, making sure that the knot is on the inside of the clip.
4. Glue the third ribbon to the top of the first two ribbons, making sure that the knot is in the middle.
5. Allow the glue to dry completely before using the hair bow.
How do you make a 5 hair bow?
Making a 5 hair bow is a simple process that can be completed in a few minutes. You will need a hair clip, a piece of ribbon, and a hot glue gun.
First, cut a piece of ribbon that is about 18 inches long. Fold the ribbon in half, and then tie a knot in the center.
Next, use the hot glue gun to attach the hair clip to one end of the ribbon.
Finally, use the hot glue gun to attach the other end of the ribbon to the center of the hair bow.
How do you make a jumbo hair bow?
Making a jumbo hair bow is a simple process that can be completed in a few easy steps. You will need a few basic supplies including a hair bow base, ribbon, scissors, and a hot glue gun.
To make a jumbo hair bow, start by clipping the hair bow base to the desired location in your hair. Next, cut a piece of ribbon that is at least double the width of the hair bow base. Center the ribbon around the hair bow base and hot glue in place. Trim the ribbon if needed so that it is even on all sides.
Finally, use the scissors to curl the ribbon into a bow shape. You can use the hot glue gun to secure the bow in place if needed. You now have a beautiful and elegant jumbo hair bow!
How do you use a wooden bow maker?
A bow maker is a tool used to make bows from wood. They can be purchased online or at a store that specializes in archery supplies. There are many different types of bow makers, but they all work in a similar way.
To use a bow maker, first select the type of bow you want to make. There are several different types, including longbows, recurve bows, and compound bows. Each type of bow has its own specific instructions, so be sure to read the instructions carefully before starting.
Next, select the type of wood you want to use. The type of wood you choose will affect the strength and durability of your bow. Be sure to select a type of wood that is strong and durable.
Once you have selected the type of wood, measure and cut the wood to the correct size. Most bow makers come with a template that will help you to cut the wood to the correct size.
Next, drill the holes in the wood. The bow maker will come with a drill bit that will fit the screws. Drill the holes in the wood according to the instructions.
Then, using the screws that come with the bow maker, attach the bow arms to the wood.
Finally, string the bow. The bow maker will come with instructions on how to do this.
Once the bow is strung, you are ready to start shooting. Be sure to practice with your new bow before taking it out hunting or target shooting.